M.2 NVMe SSD PCIExpress PCIe x1 Adapter New ②

This is the full-height version of the x1 type. We also have the x4 type available.

This is one adapter for installing an M.2 NVMe SSD into a PCI Express x1 slot. This is the full-height version. We also sell a low-profile version.
SATA SSDs cannot be used. It supports Gen4. It can also be installed in x16, x8, and x4 slots. It supports SSD sizes 2280, 2260, 2242, and 2230.

The item you will receive is new and comes with the bracket and board separated as shown in the third photo. You will need to screw them together yourself.

Please refer to the fourth and fifth photos for instructions on how to install the SSD. Insert the SSD into the groove of the round metal part and secure it from the back of the board with the included screws.

By the way, when using a 2280 SSD, you cannot attach the bracket after installing the SSD. Please attach the bracket first, then install the SSD.

This will connect a PCIe x4 SSD at x1 speeds. For reference, we have included CrystalDiskMark measurement results for Gen3 and Gen4. While it may vary depending on the SSD, this is likely the performance limit.

If you wish to purchase multiple items, please comment as we have them in stock.

To keep prices low, we will ship via standard mail. Please check our profile for details about standard mail.
(We do not use cardboard or thick paper. The item will be wrapped in kitchen plastic bags and placed in an envelope for shipping. We have not had any issues with this method so far, but if you are concerned, we can ship via Yu-Packet Post with bubble wrap and cardboard for an additional 100 yen. Please comment if you would like this option.)
#PCPartsShopAdapter